FM CFA20-4 |
 |
| Data Sheet Information Compiled by: JEAN-DENIS BACHAND |
| New: 31 March 2006 |
Drawing by: Jean-Denis Bachand |
| - |
| Engine Builder: Fairbanks Morse |
Engine: 2-cycle 38D8 1/8 (10 cylinder OP) |
| Bore & Stroke |
8" X 10" |
| RPM (Maximum / Minimum) |
850 / 350 |
| Main Generator: Westinghouse - WE472A |
Horsepower: 2000 |
| Gear Ratio: 58:21 |
Speed: 100 mph |
| Trucks: 4-Wheel |
Configuration: B-B |
| Traction Motor Blowers: Belt Drive (1) |
Model: Westinghouse Y201A |
| Weight: 246,000 lbs |
Traction Motors: Westinghouse - WE370F(four) |
| Tractive Effort (starting) 73,800 lbs @ 30% |
Tractive Effort (continuous): 32,000 lbs @ 23.2 mph |
| Multiple Unit Capability: Yes |
Dynamic Braking: Yes |
| Auxilary Generator: Westinghouse |
Alternator: -- |
| Air Brake: Westinghouse |
Model: 24RSL |
| Compressor: Westinghouse |
Model: 3C2C |
| Quantity Built: 12
|
Dates: 2/1950 to 10/1953 |
| - |
- |
| Exterior Dimensions
| CFA 16-4 |
| Total Length |
56'-06.5" |
| Wheel Diameter |
42" |
| Truck Wheel Base |
9'-04" |
| Height to Top Engine Hood |
15'-00" |
| Height to Top Cab Hood |
14'-03" |
| Cab Width |
10'-06.5" |
| Engine Hood Width |
10'-00" |
| Center Bolster |
31'-00" |
| Center Front Truck to Front Pilot |
2'-08" |
| Center Rear Tucrk to Rear Pilot |
2'-08" |
| Distance between Truck Centers |
40'-04" |
| Minimum Turning Radious |
29 degrees |
| -
| - |
| Fuel Oil: 1200
| Lubricating Oil: 350 |
| Engine Cooling Water: 330
| Sand Capacity: 20 cu. ft. |
| Options: VApor Clarkson Boiler (800 lbs/hr) |
| - |
 |
| Drawing by: Jean-Denis Bachand |
Reference Sources:
- Diesel Locomtoives, Vol.2, by Bob Hayden
- Diesel Locomotives, The First 50 Years by Louis A. Mare
- "Early Diesel and Electric Locomotives," Rail Heritage Publications
- Diesel & Electric Locomotive Specificiations, 1981 by F.K. Hudson
- Train Shed Cyclopedia, Vol. 20, 58, 60, 64, 80
|